Flash sync. repair, MS
A flash sync repair requires a total disassembly of the digital back. A replacement is made of the integrated circuit that controls the flash output located on the link board.
Before reassembly of the digital back, additional hardware modifications are conducted if necessary to insure the best possible performance for the specific product.
After a piezo-element calibration and a CCD-sensor calibration, the CCD and the IR-filter are cleaned. The filter is then remounted (or replaced if it has any scratches). For further details, please refer to the descriptions of “piezo calibration” and “CCD cleaning”.
After passing all tests, the unit is ready to be returned.